Notes
- Radius machining after SNMG machining process
- Lead angle 95°
- Inserts selection was CNMG (4 cutting edges) to reduce cost/part
- 1 nozzles Ø1 on the radius + 4 nozzles Ø0,8 (2 nozzles/edge)
Solution Specifications
| Material | 6AL-4V Titanium |
| Tool Description | Kennametal Monobloc PSC80 UHP Cutting Unit |
| Drawing Number | 60619209 |
| Type of Comp. | Forged |
| Operation | Roughing |
| Cutting Edge | Carbide |
| Insert | Kennametal CNMG190616RP – KCU10 |
| Vc | 90 m/min (300 SFM) |
| F | 0,3 mm/rev (.012 IPR) |
| Ap | 2-4 mm (.08 – .16 DOC) |
| Pressure | 350 bar |
| Coolant supply | Through Nozzles (QPM HPC) |
| Objective | Modular Head with Hirth Serration |
| Tool Life | ~ 15 min |
