Notes
- Face turn and longitudinal turn operation -> 1 tool for roughing
- Lead angle 95°
- Inserts selection was CNMG (4 cutting edges) to reduce cost/part
Solution Specifications
Material | 6AL-4V Titanium |
Tool Description | Kennametal Monobloc PSC63 Cutting Unit |
Kennametal MM# | Special order tools, please contact Kennametal for additional information |
Reference | PSC63DCLNL12KC04 |
Type of comp. | Pre-machined |
Operation | Roughing |
Cutting Edge | Carbide |
Insert | Kennametal CNMG120412MS – KCU10 |
Vc | 60 m/min (200 SFM) |
F | 0,3 mm/rev (.012 IPR) |
Ap | 2 mm (.080 DOC) |
Pressure | 70 bar |
Coolant supply | Through Nozzles (Chip Blaster) |
Objective | Versatile |
Tool Life | ~ 15 min |