Notes
- Longitudinal and face turn internal
- Low pressure on workpiece -> R0,4
- 3 coolant bores Ø1,2mm countersunk -> covering complete insert
Solution Specifications
| Material | Inconel 718+ |
| Tool Description | Kennametal Monolithic HSK100A Turning Tool |
| Drawing Number | 60375465 |
| Type of Comp. | Forged |
| Operation | Finishing |
| Cutting Edge | Carbide |
| Insert | Kennametal CNMG120408FP – KCU10 |
| Vc | 55 m/min (180 SFM) |
| F | 0,12 mm/rev (.005 IPR) |
| Ap | 0,5 mm (.02 DOC) |
| Pressure | 70 bar |
| Coolant supply | Through Clamp |
| Objective | Good surface & chip evacuation |
| Tool Life | ~ 17 min |
